Facility List
Injection Molding Presses
Every press on the floor, so you can see exactly where your part fits.
| Qty | Clamp Tonnage | Shot Capacity | Tie Bar Spacing (in) |
|---|---|---|---|
| 1 | 85 ton | 5 oz | 13.5 × 13.5 |
| 1 | 85 ton | 3 oz | 13.5 × 13.5 |
| 1 | 120 ton | 10.7 oz | 17 × 17 |
| 1 | 170 ton | 14.7 oz | 20 × 20 |
| 1 | 230 ton | 8 oz | 22 × 22 |
| 1 | 230 ton | 8.5 oz | 22 × 22 |
| 1 | 230 ton | 14 oz | 22 × 22 |
| 1 | 230 ton | 14.7 oz | 22 × 22 |
| 1 | 230 ton | 20 oz | 22 × 22 |
| 1 | 230 ton | 25 oz | 22 × 22 |
| 3 | 300 ton | 14 oz | 25 × 25 |
| 1 | 300 ton | 20 oz | 25 × 25 |
| 1 | 300 ton | 30 oz | 25 × 25 |
| 1 | 300 ton | 25 oz | — |
| 2 | 400 ton | 25 oz | 28 × 28 |
| 1 | 500 ton | 60 oz | 32.5 × 32.5 |
| 1 | 500 ton | 80 oz | 32.5 × 32.5 |
| 20 | Total presses | ||
Supporting Equipment
- Chillers
- Temperature control units
- Material dryers
- Grinders
Secondary Capabilities
- Pad printing
- Sonic welding
- Hot stamping
- Milling
- Drill press work
- Programmable wire cutting & stripping
- Assembly
Engineering & Tooling
Complete engineering, tool drawing, and mold construction is available through our facility.
Engineering & Mold DesignNot sure which press fits your part?
Send us your print and we will tell you.